This is the latest recevied telemetry packets stored in our database for station/object SM7MDO-19. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792152241 | 4.19 | 0 | 0 | 0 | 0 |
| 1792151337 | 4.19 | 0 | 0 | 0 | 0 |
| 1792150433 | 4.19 | 0 | 0 | 0 | 0 |
| 1792148625 | 4.19 | 0 | 0 | 0 | 0 |
| 1792147721 | 4.19 | 0 | 0 | 0 | 0 |
| 1792146817 | 4.19 | 0 | 0 | 0 | 0 |
| 1792145913 | 4.19 | 0 | 0 | 0 | 0 |
| 1792145009 | 4.19 | 0 | 0 | 0 | 0 |
| 1792144105 | 4.19 | 0 | 0 | 0 | 0 |
| 1792143201 | 4.19 | 0 | 0 | 0 | 0 |
| 1792141393 | 4.09 | 0 | 0 | 0 | 0 |
| 1792140489 | 4.03 | 0 | 0 | 0 | 0 |
| 1792139585 | 3.96 | 0 | 0 | 0 | 0 |
| 1792138681 | 3.9 | 0 | 0 | 0 | 0 |
| 1792137777 | 3.84 | 0 | 0 | 0 | 0 |
| 1792136873 | 3.79 | 0 | 0 | 0 | 0 |
| 1792135969 | 3.76 | 0 | 0 | 0 | 0 |
| 1792135065 | 3.74 | 0 | 0 | 0 | 0 |
| 1792134161 | 3.72 | 0 | 0 | 0 | 0 |
| 1792133257 | 3.7 | 0 | 0 | 0 | 0 |
| 1792132353 | 3.65 | 0 | 0 | 0 | 0 |
| 1792130545 | 3.57 | 0 | 0 | 0 | 0 |
| 1792130514 | 3.57 | 0 | 0 | 0 | 0 |
| 1792130466 | 3.57 | 0 | 0 | 0 | 0 |
| 1792130442 | 3.57 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)