This is the latest recevied telemetry packets stored in our database for station/object WHTANK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vb* | Vsp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774125973 | 4.2 Volt | 21.78 Volt | 0 | 0 | 0 |
| 1774125372 | 4.2 Volt | 21.54 Volt | 0 | 0 | 0 |
| 1774124772 | 4.2 Volt | 21.42 Volt | 0 | 0 | 0 |
| 1774124172 | 4.2 Volt | 21.7 Volt | 0 | 0 | 0 |
| 1774123575 | 4.2 Volt | 21.68 Volt | 0 | 0 | 0 |
| 1774122971 | 4.2 Volt | 21.6 Volt | 0 | 0 | 0 |
| 1774122371 | 4.21 Volt | 21.68 Volt | 0 | 0 | 0 |
| 1774121771 | 4.21 Volt | 21.66 Volt | 0 | 0 | 0 |
| 1774121171 | 4.21 Volt | 21.46 Volt | 0 | 0 | 0 |
| 1774120574 | 4.21 Volt | 21.42 Volt | 0 | 0 | 0 |
| 1774119970 | 4.21 Volt | 21.32 Volt | 0 | 0 | 0 |
| 1774119369 | 4.22 Volt | 21.24 Volt | 0 | 0 | 0 |
| 1774118768 | 4.22 Volt | 21.08 Volt | 0 | 0 | 0 |
| 1774118168 | 4.22 Volt | 21.04 Volt | 0 | 0 | 0 |
| 1774117568 | 4.22 Volt | 21.1 Volt | 0 | 0 | 0 |
| 1774116971 | 4.22 Volt | 20.98 Volt | 0 | 0 | 0 |
| 1774116368 | 4.22 Volt | 21.04 Volt | 0 | 0 | 0 |
| 1774115770 | 4.23 Volt | 21.22 Volt | 0 | 0 | 0 |
| 1774115165 | 4.23 Volt | 21.08 Volt | 0 | 0 | 0 |
| 1774114566 | 4.23 Volt | 21.14 Volt | 0 | 0 | 0 |
| 1774113965 | 4.25 Volt | 21.2 Volt | 0 | 0 | 0 |
| 1774113369 | 4.25 Volt | 21.24 Volt | 0 | 0 | 0 |
| 1774112766 | 4.26 Volt | 20.66 Volt | 0 | 0 | 0 |
| 1774112165 | 4.23 Volt | 5.44 Volt | 0 | 0 | 0 |
| 1774111565 | 4.21 Volt | 5.44 Volt | 0 | 0 | 0 |
*Used Equation Coefficients:
Vb: 0, 0.01, 0
Vsp: 0, 0.02, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)