This is the latest recevied telemetry packets stored in our database for station/object DL6DBZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792130885 | 741 | 4074 | 8147 | 0 | 0 |
| 1792130844 | 741 | 4074 | 8164 | 0 | 0 |
| 1792130827 | 741 | 4074 | 8174 | 0 | 0 |
| 1792130676 | 742 | 4196 | 8162 | 7933 | 0 |
| 1792130660 | 742 | 4196 | 8165 | 7933 | 0 |
| 1792130415 | 742 | 4479 | 8182 | 7350 | 0 |
| 1792130396 | 742 | 4479 | 8175 | 7350 | 0 |
| 1792130297 | 741 | 4623 | 8153 | 6926 | 0 |
| 1792130201 | 741 | 4541 | 8161 | 6982 | 0 |
| 1792130179 | 741 | 4449 | 8169 | 6899 | 0 |
| 1792130162 | 741 | 4449 | 8179 | 6899 | 0 |
| 1792130124 | 740 | 4347 | 8179 | 6705 | 0 |
| 1792130107 | 740 | 4347 | 8161 | 6705 | 0 |
| 1792129901 | 740 | 4291 | 8148 | 5801 | 0 |
| 1792129883 | 740 | 4327 | 8152 | 5520 | 0 |
| 1792129866 | 740 | 4327 | 8143 | 5520 | 0 |
| 1792129806 | 740 | 4382 | 8152 | 4925 | 0 |
| 1792129789 | 740 | 4382 | 8149 | 4925 | 0 |
| 1792129733 | 740 | 4468 | 8175 | 4613 | 0 |
| 1792129717 | 740 | 4468 | 8170 | 4613 | 0 |
| 1792129680 | 741 | 4553 | 8170 | 4448 | 0 |
| 1792129661 | 741 | 4553 | 8168 | 4448 | 0 |
| 1792129634 | 741 | 4670 | 8171 | 4169 | 0 |
| 1792129611 | 741 | 4670 | 8152 | 4169 | 0 |
| 1792129593 | 741 | 4670 | 8160 | 4169 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)