This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790649821 | 12.01 Volts | 76.16 Deg.F | 0 | 0 | 0 |
| 1790648026 | 12.04 Volts | 77.92 Deg.F | 0 | 0 | 0 |
| 1790646230 | 12.07 Volts | 79.67 Deg.F | 0 | 0 | 0 |
| 1790644435 | 12.1 Volts | 78.8 Deg.F | 0 | 0 | 0 |
| 1790642639 | 12.1 Volts | 79.67 Deg.F | 0 | 0 | 0 |
| 1790640844 | 13.45 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790640816 | 13.39 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790640753 | 13.42 Volts | 86.71 Deg.F | 0 | 0 | 0 |
| 1790640530 | 13.48 Volts | 86.71 Deg.F | 0 | 0 | 0 |
| 1790640479 | 13.27 Volts | 86.71 Deg.F | 0 | 0 | 0 |
| 1790640420 | 13.42 Volts | 86.71 Deg.F | 0 | 0 | 0 |
| 1790640330 | 13.36 Volts | 87.59 Deg.F | 0 | 0 | 0 |
| 1790640216 | 13.39 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790640198 | 13.42 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790640154 | 13.42 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790640065 | 13.42 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790639970 | 13.33 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790639945 | 13.24 Volts | 84.95 Deg.F | 0 | 0 | 0 |
| 1790639931 | 13.3 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790639752 | 12.04 Volts | 85.83 Deg.F | 0 | 0 | 0 |
| 1790637956 | 12.07 Volts | 84.07 Deg.F | 0 | 0 | 0 |
| 1790636160 | 12.1 Volts | 82.31 Deg.F | 0 | 0 | 0 |
| 1790634364 | 12.13 Volts | 79.67 Deg.F | 0 | 0 | 0 |
| 1790632533 | 13.48 Volts | 77.92 Deg.F | 0 | 0 | 0 |
| 1790632513 | 13.42 Volts | 78.8 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -602.43
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)