This is the latest recevied telemetry packets stored in our database for station/object KB3YZO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770424207 | 1306 | 89 | 0 | 0 | 0 |
| 1770424154 | 1306 | 90 | 0 | 0 | 0 |
| 1770423008 | 1307 | 84 | 0 | 0 | 0 |
| 1770422956 | 1307 | 85 | 0 | 0 | 0 |
| 1770421807 | 1307 | 89 | 0 | 0 | 0 |
| 1770421753 | 1307 | 88 | 0 | 0 | 0 |
| 1770420607 | 1307 | 95 | 0 | 0 | 0 |
| 1770420554 | 1307 | 93 | 0 | 0 | 0 |
| 1770419407 | 1307 | 105 | 0 | 0 | 0 |
| 1770419353 | 1307 | 105 | 0 | 0 | 0 |
| 1770418207 | 1307 | 103 | 0 | 0 | 0 |
| 1770417007 | 1307 | 102 | 0 | 0 | 0 |
| 1770416954 | 1307 | 103 | 0 | 0 | 0 |
| 1770415807 | 1307 | 100 | 0 | 0 | 0 |
| 1770415753 | 1307 | 101 | 0 | 0 | 0 |
| 1770414607 | 1308 | 103 | 0 | 0 | 0 |
| 1770413407 | 1308 | 103 | 0 | 0 | 0 |
| 1770413353 | 1307 | 103 | 0 | 0 | 0 |
| 1770412208 | 1308 | 99 | 0 | 0 | 0 |
| 1770412155 | 1308 | 99 | 0 | 0 | 0 |
| 1770411009 | 1308 | 109 | 0 | 0 | 0 |
| 1770410954 | 1308 | 109 | 0 | 0 | 0 |
| 1770409808 | 1309 | 111 | 0 | 0 | 0 |
| 1770409753 | 1308 | 111 | 0 | 0 | 0 |
| 1770408607 | 1309 | 106 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)