APRS Track Direct

My position About ☰

reset

TA3GR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3GR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1754134698	5 Pkt	0 Pkt	13 Pkt	-32 dBm	12.1 V
1754134073	4 Pkt	1 Pkt	16 Pkt	-33 dBm	12.1 V
1754133446	1 Pkt	1 Pkt	20 Pkt	-33 dBm	12.1 V
1754132821	3 Pkt	0 Pkt	12 Pkt	-32 dBm	12.1 V
1754132197	5 Pkt	1 Pkt	35 Pkt	-32 dBm	12.1 V
1754131570	6 Pkt	1 Pkt	31 Pkt	-32 dBm	12.1 V
1754130942	0 Pkt	1 Pkt	25 Pkt	-32 dBm	12.1 V
1754130316	4 Pkt	0 Pkt	33 Pkt	-32 dBm	12.1 V
1754129691	4 Pkt	4 Pkt	28 Pkt	-32 dBm	12.1 V
1754129064	0 Pkt	1 Pkt	20 Pkt	-32 dBm	12.1 V
1754128439	4 Pkt	0 Pkt	5 Pkt	-31 dBm	12.1 V
1754127815	5 Pkt	1 Pkt	11 Pkt	-32 dBm	12.1 V
1754127190	4 Pkt	1 Pkt	9 Pkt	-29 dBm	12.1 V
1754126566	0 Pkt	0 Pkt	11 Pkt	-29 dBm	12.1 V
1754125941	3 Pkt	1 Pkt	12 Pkt	-29 dBm	12.1 V
1754125316	5 Pkt	1 Pkt	9 Pkt	-28 dBm	12.1 V
1754124691	0 Pkt	0 Pkt	5 Pkt	-28 dBm	12.1 V
1754124068	5 Pkt	1 Pkt	13 Pkt	-29 dBm	12.1 V
1754123442	3 Pkt	1 Pkt	10 Pkt	-29 dBm	12.1 V
1754122818	1 Pkt	2 Pkt	8 Pkt	-29 dBm	12.12 V
1754122192	3 Pkt	0 Pkt	10 Pkt	-28 dBm	12.1 V
1754121568	2 Pkt	1 Pkt	10 Pkt	-29 dBm	12.12 V
1754120943	0 Pkt	1 Pkt	4 Pkt	-29 dBm	12.1 V
1754120319	6 Pkt	0 Pkt	11 Pkt	-28 dBm	12.12 V
1754119694	4 Pkt	2 Pkt	12 Pkt	-29 dBm	12.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)