APRS Track Direct

My position About ☰

reset

LZ0BOT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0BOT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	EffTo*	Temp*
1786731835	12.75 Volt	160 Pkt	50 Pkt	61 Pcnt	23.52 C
1786731235	12.75 Volt	160 Pkt	50 Pkt	61 Pcnt	23.52 C
1786730635	12.75 Volt	150 Pkt	50 Pkt	61 Pcnt	23.52 C
1786730035	12.75 Volt	140 Pkt	50 Pkt	61 Pcnt	23.52 C
1786729436	12.75 Volt	140 Pkt	50 Pkt	61 Pcnt	23.52 C
1786729436	12.75 Volt	140 Pkt	50 Pkt	61 Pcnt	23.52 C
1786728836	12.75 Volt	140 Pkt	50 Pkt	61 Pcnt	23.67 C
1786728236	12.75 Volt	130 Pkt	50 Pkt	61 Pcnt	23.67 C
1786727636	12.75 Volt	120 Pkt	50 Pkt	61 Pcnt	23.67 C
1786727036	12.75 Volt	130 Pkt	50 Pkt	61 Pcnt	23.81 C
1786726436	12.75 Volt	130 Pkt	50 Pkt	61 Pcnt	23.81 C
1786725837	12.75 Volt	120 Pkt	50 Pkt	61 Pcnt	23.81 C
1786725836	12.75 Volt	120 Pkt	50 Pkt	61 Pcnt	23.81 C
1786725236	12.75 Volt	130 Pkt	50 Pkt	61 Pcnt	23.96 C
1786724636	12.75 Volt	150 Pkt	60 Pkt	61 Pcnt	23.96 C
1786724036	12.75 Volt	180 Pkt	70 Pkt	61 Pcnt	24.11 C
1786723436	12.75 Volt	190 Pkt	70 Pkt	61 Pcnt	24.4 C
1786722836	12.75 Volt	200 Pkt	70 Pkt	61 Pcnt	24.4 C
1786722236	12.75 Volt	190 Pkt	70 Pkt	61 Pcnt	24.4 C
1786722236	12.75 Volt	190 Pkt	70 Pkt	61 Pcnt	24.4 C
1786721636	12.75 Volt	200 Pkt	70 Pkt	61 Pcnt	24.4 C
1786721036	12.75 Volt	200 Pkt	70 Pkt	61 Pcnt	24.26 C
1786720436	12.75 Volt	190 Pkt	60 Pkt	61 Pcnt	24.26 C
1786719836	12.75 Volt	170 Pkt	60 Pkt	61 Pcnt	24.26 C
1786719236	12.75 Volt	170 Pkt	60 Pkt	61 Pcnt	24.4 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Temp: 0, 0.147, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)