This is the latest recevied telemetry packets stored in our database for station/object DL0BAS-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758196923 | 1010.8 hPa | 20.4 C deg | 100 % | 1019.4 hPa | 0 C deg |
| 1758195123 | 1010.9 hPa | 19.9 C deg | 100 % | 1019.5 hPa | 0 C deg |
| 1758193323 | 1011 hPa | 19.4 C deg | 100 % | 1019.6 hPa | 0 C deg |
| 1758191523 | 1010.8 hPa | 19.5 C deg | 100 % | 1019.5 hPa | 0 C deg |
| 1758189723 | 1010.8 hPa | 18.2 C deg | 100 % | 1019.5 hPa | 0 C deg |
| 1758187923 | 1010.7 hPa | 18 C deg | 100 % | 1019.4 hPa | 0 C deg |
| 1758186123 | 1010.6 hPa | 17.9 C deg | 100 % | 1019.2 hPa | 0 C deg |
| 1758184323 | 1010.5 hPa | 17.3 C deg | 100 % | 1019.2 hPa | 0 C deg |
| 1758182522 | 1010.2 hPa | 17 C deg | 100 % | 1018.9 hPa | 0 C deg |
| 1758180722 | 1010.1 hPa | 17 C deg | 100 % | 1018.8 hPa | 0 C deg |
| 1758178922 | 1010 hPa | 16.5 C deg | 100 % | 1018.7 hPa | 0 C deg |
| 1758177122 | 1009.7 hPa | 16.4 C deg | 100 % | 1018.4 hPa | 0 C deg |
| 1758175322 | 1009.5 hPa | 16.3 C deg | 100 % | 1018.2 hPa | 0 C deg |
| 1758173522 | 1009.3 hPa | 16.3 C deg | 100 % | 1018 hPa | 0 C deg |
| 1758171722 | 1009.4 hPa | 16.2 C deg | 100 % | 1018.1 hPa | 0 C deg |
| 1758137521 | 1011.3 hPa | 16.2 C deg | 97.2 % | 1020 hPa | 0 C deg |
| 1758135721 | 1011.1 hPa | 16.8 C deg | 89 % | 1019.8 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)