This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774093887 | 219 Count | 389 Count | 200 Count | 4.26 VDC | 0 VDC |
| 1774092987 | 208 Count | 366 Count | 190 Count | 4.29 VDC | 0 VDC |
| 1774092086 | 196 Count | 342 Count | 179 Count | 4.28 VDC | 0 VDC |
| 1774091185 | 187 Count | 323 Count | 171 Count | 4.28 VDC | 0 VDC |
| 1774089384 | 169 Count | 291 Count | 155 Count | 4.22 VDC | 0 VDC |
| 1774088500 | 155 Count | 273 Count | 146 Count | 4.21 VDC | 0 VDC |
| 1774087600 | 146 Count | 256 Count | 138 Count | 4.19 VDC | 0 VDC |
| 1774086699 | 135 Count | 232 Count | 128 Count | 4.13 VDC | 0 VDC |
| 1774085798 | 125 Count | 212 Count | 119 Count | 4.12 VDC | 0 VDC |
| 1774084897 | 113 Count | 186 Count | 108 Count | 4.1 VDC | 0 VDC |
| 1774083996 | 96 Count | 154 Count | 92 Count | 4.1 VDC | 0 VDC |
| 1774083096 | 86 Count | 128 Count | 83 Count | 4.13 VDC | 0 VDC |
| 1774082195 | 69 Count | 107 Count | 67 Count | 4.12 VDC | 0 VDC |
| 1774081294 | 58 Count | 91 Count | 57 Count | 4.1 VDC | 0 VDC |
| 1774080393 | 20 Count | 36 Count | 20 Count | 4.1 VDC | 0 VDC |
| 1774079493 | 446 Count | 1003 Count | 399 Count | 4.09 VDC | 0 VDC |
| 1774078592 | 433 Count | 985 Count | 387 Count | 4.05 VDC | 0 VDC |
| 1774077691 | 422 Count | 967 Count | 377 Count | 4.05 VDC | 0 VDC |
| 1774076790 | 412 Count | 954 Count | 368 Count | 4.03 VDC | 0 VDC |
| 1774075889 | 401 Count | 929 Count | 358 Count | 4.02 VDC | 0 VDC |
| 1774074988 | 392 Count | 908 Count | 350 Count | 4 VDC | 0 VDC |
| 1774074088 | 380 Count | 886 Count | 339 Count | 3.99 VDC | 0 VDC |
| 1774073187 | 371 Count | 860 Count | 331 Count | 3.98 VDC | 0 VDC |
| 1774072286 | 360 Count | 829 Count | 321 Count | 3.97 VDC | 0 VDC |
| 1774071385 | 351 Count | 807 Count | 313 Count | 3.96 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)