This is the latest recevied telemetry packets stored in our database for station/object K6IXQ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794903001 | 400 | 610 | 0 | 0 | 0 |
| 1794901208 | 400 | 610 | 0 | 0 | 0 |
| 1794899415 | 400 | 611 | 0 | 0 | 0 |
| 1794897626 | 400 | 611 | 0 | 0 | 0 |
| 1794894036 | 400 | 612 | 0 | 0 | 0 |
| 1794890448 | 401 | 613 | 0 | 0 | 0 |
| 1794888655 | 401 | 613 | 0 | 0 | 0 |
| 1794885070 | 403 | 615 | 0 | 0 | 0 |
| 1794881456 | 466 | 617 | 0 | 0 | 0 |
| 1794881349 | 465 | 616 | 0 | 0 | 0 |
| 1794881300 | 466 | 616 | 0 | 0 | 0 |
| 1794879925 | 405 | 617 | 0 | 0 | 0 |
| 1794878131 | 467 | 618 | 0 | 0 | 0 |
| 1794878065 | 469 | 618 | 0 | 0 | 0 |
| 1794877994 | 467 | 617 | 0 | 0 | 0 |
| 1794877952 | 469 | 617 | 0 | 0 | 0 |
| 1794874914 | 400 | 618 | 0 | 0 | 0 |
| 1794867738 | 404 | 618 | 0 | 0 | 0 |
| 1794865944 | 404 | 617 | 0 | 0 | 0 |
| 1794860565 | 402 | 616 | 0 | 0 | 0 |
| 1794856977 | 402 | 614 | 0 | 0 | 0 |
| 1794855184 | 403 | 612 | 0 | 0 | 0 |
| 1794851598 | 401 | 609 | 0 | 0 | 0 |
| 1794849806 | 401 | 608 | 0 | 0 | 0 |
| 1794848013 | 401 | 608 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)