This is the latest recevied telemetry packets stored in our database for station/object vu2eoj-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcell* | RSSI* | Light* | Awake* | Value5* |
|---|---|---|---|---|---|
| 1754134494 | 4.66 Vdc | -72 dBm | 64 lux | 4.1 secs | 0 |
| 1754133900 | 4.65 Vdc | -73 dBm | 49 lux | 9.1 secs | 0 |
| 1754128340 | 4.65 Vdc | -80 dBm | 100 lux | 3.2 secs | 0 |
| 1754126176 | 4.69 Vdc | -71 dBm | 169 lux | 25.5 secs | 0 |
| 1754118216 | 4.67 Vdc | -83 dBm | 196 lux | 4.3 secs | 0 |
| 1754112483 | 4.67 Vdc | -74 dBm | 100 lux | 21.1 secs | 0 |
| 1754105855 | 4.69 Vdc | -85 dBm | 144 lux | 11.6 secs | 0 |
| 1754104318 | 4.67 Vdc | -84 dBm | 121 lux | 14.4 secs | 0 |
| 1754099763 | 4.66 Vdc | -86 dBm | 4 lux | 3.2 secs | 0 |
| 1754096949 | 4.66 Vdc | -71 dBm | 0 lux | 4.2 secs | 0 |
| 1754094865 | 4.67 Vdc | -73 dBm | 0 lux | 3.2 secs | 0 |
| 1754093384 | 4.66 Vdc | -72 dBm | 0 lux | 3.1 secs | 0 |
| 1754057331 | 4.67 Vdc | -71 dBm | 0 lux | 3.1 secs | 0 |
| 1754056754 | 4.66 Vdc | -72 dBm | 0 lux | 3.3 secs | 0 |
| 1754056178 | 4.65 Vdc | -71 dBm | 1 lux | 4.2 secs | 0 |
| 1754055602 | 4.66 Vdc | -73 dBm | 1 lux | 3.2 secs | 0 |
| 1754055025 | 4.65 Vdc | -71 dBm | 4 lux | 4.2 secs | 0 |
| 1754054450 | 4.66 Vdc | -71 dBm | 9 lux | 4.1 secs | 0 |
| 1754053881 | 4.66 Vdc | -71 dBm | 36 lux | 3.1 secs | 0 |
| 1754049820 | 4.66 Vdc | -71 dBm | 25 lux | 12.7 secs | 0 |
| 1754049252 | 4.66 Vdc | -84 dBm | 25 lux | 11.4 secs | 0 |
*Used Equation Coefficients:
Vcell: 0, 0.01, 2.5
RSSI: 0, -1, 0
Light: 1, 0, 0
Awake: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)