This is the latest recevied telemetry packets stored in our database for station/object GM4HYG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790657055 | 6 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1790656155 | 6 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1790633657 | 6 Count | 904 Count | 0 Count | 0 VDC | 0 VDC |
| 1790632757 | 6 Count | 904 Count | 0 Count | 0 VDC | 0 VDC |
| 1790631857 | 6 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1790630957 | 4 Count | 901 Count | 0 Count | 0 VDC | 0 VDC |
| 1790630057 | 4 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1790629157 | 4 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1790628256 | 4 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1790627356 | 4 Count | 897 Count | 0 Count | 0 VDC | 0 VDC |
| 1790626456 | 4 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1790625556 | 4 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1790624656 | 4 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1790623756 | 4 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1790622856 | 4 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1790621956 | 4 Count | 886 Count | 0 Count | 0 VDC | 0 VDC |
| 1790621056 | 4 Count | 837 Count | 0 Count | 0 VDC | 0 VDC |
| 1790620156 | 4 Count | 780 Count | 0 Count | 0 VDC | 0 VDC |
| 1790619256 | 4 Count | 777 Count | 0 Count | 0 VDC | 0 VDC |
| 1790618356 | 4 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
| 1790617456 | 4 Count | 775 Count | 0 Count | 0 VDC | 0 VDC |
| 1790616556 | 4 Count | 774 Count | 0 Count | 0 VDC | 0 VDC |
| 1790615655 | 4 Count | 773 Count | 0 Count | 0 VDC | 0 VDC |
| 1790614755 | 4 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1790613855 | 4 Count | 771 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)