APRS Track Direct

My position About ☰

reset

HS6NDK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6NDK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790668266	14.22 Volt	0 Pkt	550 Pkt	55 Pcnt
1790664666	14.22 Volt	0 Pkt	770 Pkt	55 Pcnt
1790661066	14.22 Volt	10 Pkt	680 Pkt	55 Pcnt
1790657466	14.22 Volt	0 Pkt	710 Pkt	55 Pcnt
1790653866	14.22 Volt	0 Pkt	880 Pkt	55 Pcnt
1790650266	14.22 Volt	0 Pkt	690 Pkt	55 Pcnt
1790646666	14.22 Volt	0 Pkt	710 Pkt	55 Pcnt
1790643066	14.22 Volt	0 Pkt	350 Pkt	55 Pcnt
1790639467	14.22 Volt	0 Pkt	720 Pkt	55 Pcnt
1790635867	14.22 Volt	10 Pkt	710 Pkt	55 Pcnt
1790632267	14.22 Volt	0 Pkt	900 Pkt	55 Pcnt
1790628667	14.22 Volt	0 Pkt	880 Pkt	55 Pcnt
1790625067	14.22 Volt	10 Pkt	1000 Pkt	55 Pcnt
1790621467	14.22 Volt	0 Pkt	1000 Pkt	55 Pcnt
1790617867	14.22 Volt	0 Pkt	770 Pkt	55 Pcnt
1790614267	14.22 Volt	0 Pkt	1000 Pkt	55 Pcnt
1790610667	14.22 Volt	0 Pkt	1000 Pkt	55 Pcnt
1790607067	14.22 Volt	0 Pkt	1000 Pkt	55 Pcnt
1790603467	14.22 Volt	0 Pkt	880 Pkt	55 Pcnt
1790599868	14.22 Volt	0 Pkt	550 Pkt	55 Pcnt
1790596268	14.22 Volt	0 Pkt	1000 Pkt	55 Pcnt
1790592668	14.22 Volt	0 Pkt	880 Pkt	55 Pcnt
1790589068	14.22 Volt	0 Pkt	800 Pkt	55 Pcnt
1790585468	14.22 Volt	0 Pkt	1000 Pkt	55 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)