This is the latest recevied telemetry packets stored in our database for station/object YC1SDZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Satellite* | Value5* |
|---|---|---|---|---|---|
| 1774170455 | 39 °C | 35 %RH | 1000 hPa | 12 Sat | 0 |
| 1774168554 | 38 °C | 31 %RH | 999 hPa | 12 Sat | 0 |
| 1774166654 | 39 °C | 32 %RH | 1000 hPa | 12 Sat | 0 |
| 1774164754 | 39 °C | 33 %RH | 1000 hPa | 11 Sat | 0 |
| 1774162854 | 39 °C | 32 %RH | 1000 hPa | 11 Sat | 0 |
| 1774162136 | 39 °C | 32 %RH | 1001 hPa | 10 Sat | 0 |
| 1774160236 | 39 °C | 32 %RH | 1001 hPa | 11 Sat | 0 |
| 1774158336 | 39 °C | 31 %RH | 1001 hPa | 11 Sat | 0 |
| 1774156436 | 38 °C | 33 %RH | 1002 hPa | 11 Sat | 0 |
| 1774154536 | 36 °C | 38 %RH | 1003 hPa | 10 Sat | 0 |
| 1774152636 | 35 °C | 40 %RH | 1003 hPa | 12 Sat | 0 |
| 1774150736 | 35 °C | 38 %RH | 1004 hPa | 10 Sat | 0 |
| 1774148836 | 35 °C | 42 %RH | 1004 hPa | 9 Sat | 0 |
| 1774146938 | 34 °C | 42 %RH | 1004 hPa | 9 Sat | 0 |
| 1774145038 | 33 °C | 51 %RH | 1004 hPa | 9 Sat | 0 |
| 1774143137 | 31 °C | 55 %RH | 1004 hPa | 8 Sat | 0 |
| 1774141238 | 32 °C | 52 %RH | 1004 hPa | 8 Sat | 0 |
| 1774139338 | 31 °C | 56 %RH | 1004 hPa | 7 Sat | 0 |
| 1774137437 | 32 °C | 51 %RH | 1003 hPa | 8 Sat | 0 |
| 1774135537 | 32 °C | 51 %RH | 1003 hPa | 9 Sat | 0 |
| 1774133637 | 31 °C | 53 %RH | 1003 hPa | 9 Sat | 0 |
| 1774131737 | 31 °C | 53 %RH | 1002 hPa | 10 Sat | 0 |
| 1774129838 | 32 °C | 50 %RH | 1002 hPa | 9 Sat | 0 |
| 1774127938 | 32 °C | 50 %RH | 1002 hPa | 10 Sat | 0 |
| 1774126040 | 31 °C | 53 %RH | 1002 hPa | 10 Sat | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)