This is the latest recevied telemetry packets stored in our database for station/object YO8CLN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | T* | Eff1h* | RX* | TX* |
|---|---|---|---|---|---|
| 1732283318 | 990 V | 1190 C | 95 Pcnt | 0 Pkt | 0 Pkt |
| 1732282910 | 1000 V | 1190 C | 94 Pcnt | 0 Pkt | 0 Pkt |
| 1732281231 | 980 V | 1190 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732280610 | 980 V | 1190 C | 90 Pcnt | 0 Pkt | 0 Pkt |
| 1732280184 | 1020 V | 1190 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732279894 | 990 V | 1190 C | 92 Pcnt | 0 Pkt | 0 Pkt |
| 1732279622 | 1000 V | 1190 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732279340 | 1000 V | 1190 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732279064 | 1000 V | 1190 C | 83 Pcnt | 0 Pkt | 0 Pkt |
| 1732278793 | 990 V | 1190 C | 93 Pcnt | 0 Pkt | 0 Pkt |
| 1732278529 | 1050 V | 1190 C | 90 Pcnt | 0 Pkt | 0 Pkt |
| 1732278274 | 1050 V | 1190 C | 91 Pcnt | 0 Pkt | 0 Pkt |
| 1732278018 | 1050 V | 1190 C | 86 Pcnt | 0 Pkt | 0 Pkt |
| 1732277768 | 1050 V | 1180 C | 88 Pcnt | 0 Pkt | 0 Pkt |
| 1732277483 | 1070 V | 1180 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732277237 | 1050 V | 1180 C | 88 Pcnt | 0 Pkt | 0 Pkt |
| 1732276972 | 1050 V | 1180 C | 80 Pcnt | 0 Pkt | 0 Pkt |
| 1732276721 | 1050 V | 1180 C | 78 Pcnt | 0 Pkt | 0 Pkt |
| 1732276462 | 1050 V | 1180 C | 73 Pcnt | 0 Pkt | 0 Pkt |
| 1732276180 | 1090 V | 1180 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732275928 | 1050 V | 1180 C | 100 Pcnt | 0 Pkt | 0 Pkt |
| 1732275333 | 1160 V | 1180 C | 75 Pcnt | 0 Pkt | 0 Pkt |
| 1732275086 | 1050 V | 1180 C | 90 Pcnt | 0 Pkt | 0 Pkt |
| 1732274832 | 1010 V | 1180 C | 93 Pcnt | 0 Pkt | 0 Pkt |
| 1732274554 | 990 V | 1170 C | 92 Pcnt | 0 Pkt | 0 Pkt |
*Used Equation Coefficients:
Vin: 0, 10, 0
T: 0, 10, 0
Eff1h: 0, 1, 0
RX: 0, 0, 0
TX: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)