APRS Track Direct

My position About ☰

reset

ED7ZAD-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED7ZAD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff24*
1790639616	14.1 Volt	230 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790639016	14.1 Volt	230 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790638416	14.1 Volt	240 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790637816	14.1 Volt	230 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790637216	14.1 Volt	230 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790636616	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790636016	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790635416	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790634816	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790634216	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790633616	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790633016	14.1 Volt	230 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790632416	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790631816	14.1 Volt	230 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790631216	14.1 Volt	220 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790630616	14.1 Volt	220 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790630016	14.1 Volt	220 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790629416	14.1 Volt	210 Pkt	10 Pkt	99 Pcnt	96 Pcnt
1790628816	14.1 Volt	200 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790628216	14.1 Volt	210 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790627616	14.1 Volt	210 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790627016	14.1 Volt	200 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790626416	14.1 Volt	210 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790625816	14.1 Volt	210 Pkt	10 Pkt	100 Pcnt	96 Pcnt
1790625216	14.1 Volt	200 Pkt	10 Pkt	100 Pcnt	96 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff24: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)