APRS Track Direct

My position About ☰

reset

DL5WB-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL5WB-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1764078444	979.5 hPa	21 C deg	1004.5 hPa	0 C deg
1764077092	979.4 hPa	20.8 C deg	1004.4 hPa	0 C deg
1764076316	979.4 hPa	20.5 C deg	1004.4 hPa	0 C deg
1764075602	979.3 hPa	20.9 C deg	1004.3 hPa	0 C deg
1764075566	979.3 hPa	21 C deg	1004.3 hPa	0 C deg
1764075524	979.3 hPa	21 C deg	1004.3 hPa	0 C deg
1764075348	979.3 hPa	21.1 C deg	1004.2 hPa	0 C deg
1764075297	979.2 hPa	21.1 C deg	1004.2 hPa	0 C deg
1764073764	979 hPa	21.8 C deg	1003.9 hPa	0 C deg
1764073556	979 hPa	21.7 C deg	1003.9 hPa	0 C deg
1764073265	979 hPa	21.6 C deg	1003.9 hPa	0 C deg
1764072703	979.1 hPa	20.8 C deg	1004.1 hPa	0 C deg
1764070450	978.6 hPa	22.5 C deg	1003.5 hPa	0 C deg
1764068989	978.6 hPa	22.4 C deg	1003.4 hPa	0 C deg
1764068778	978.7 hPa	22.2 C deg	1003.6 hPa	0 C deg
1764066793	978.5 hPa	21.7 C deg	1003.3 hPa	0 C deg
1764065062	978.4 hPa	22.6 C deg	1003.2 hPa	0 C deg
1764062910	978.1 hPa	19.5 C deg	1003.2 hPa	0 C deg
1764062901	978.1 hPa	19.5 C deg	1003.2 hPa	0 C deg
1764062837	978.1 hPa	19.5 C deg	1003.1 hPa	0 C deg
1764062769	978 hPa	19.5 C deg	1003.1 hPa	0 C deg
1764062756	978 hPa	19.5 C deg	1003.1 hPa	0 C deg
1764062636	978 hPa	19.4 C deg	1003 hPa	0 C deg
1764062585	978 hPa	19.5 C deg	1003 hPa	0 C deg
1764062422	977.9 hPa	19.5 C deg	1003 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)