APRS Track Direct

My position About ☰

reset

WC4PEM-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1790631965	27 C	14.33 Volt	280 Pkt	890 Pkt	68 Pcnt
1790631964	27 C	14.33 Volt	280 Pkt	890 Pkt	68 Pcnt
1790631664	26.5 C	14.33 Volt	270 Pkt	870 Pkt	67 Pcnt
1790631365	26.5 C	14.33 Volt	270 Pkt	880 Pkt	68 Pcnt
1790631364	26.5 C	14.33 Volt	270 Pkt	880 Pkt	68 Pcnt
1790631064	28 C	14.33 Volt	270 Pkt	880 Pkt	68 Pcnt
1790630765	27.5 C	14.33 Volt	280 Pkt	900 Pkt	69 Pcnt
1790630764	27.5 C	14.33 Volt	280 Pkt	900 Pkt	69 Pcnt
1790630464	26.5 C	14.33 Volt	280 Pkt	910 Pkt	70 Pcnt
1790630165	26.5 C	14.33 Volt	290 Pkt	930 Pkt	71 Pcnt
1790630164	26.5 C	14.33 Volt	290 Pkt	930 Pkt	71 Pcnt
1790629864	28 C	14.33 Volt	280 Pkt	900 Pkt	70 Pcnt
1790629565	27.5 C	14.33 Volt	270 Pkt	890 Pkt	70 Pcnt
1790629564	27.5 C	14.33 Volt	270 Pkt	890 Pkt	70 Pcnt
1790629264	26.5 C	14.33 Volt	260 Pkt	870 Pkt	70 Pcnt
1790628965	26.5 C	14.33 Volt	270 Pkt	890 Pkt	70 Pcnt
1790628964	26.5 C	14.33 Volt	270 Pkt	890 Pkt	70 Pcnt
1790628664	28 C	14.33 Volt	270 Pkt	880 Pkt	69 Pcnt
1790628366	27.5 C	14.33 Volt	280 Pkt	900 Pkt	70 Pcnt
1790628364	27.5 C	14.33 Volt	280 Pkt	900 Pkt	70 Pcnt
1790628064	26.5 C	14.33 Volt	280 Pkt	900 Pkt	70 Pcnt
1790627765	27 C	14.33 Volt	280 Pkt	910 Pkt	70 Pcnt
1790627764	27 C	14.33 Volt	280 Pkt	910 Pkt	70 Pcnt
1790627464	28 C	14.33 Volt	290 Pkt	920 Pkt	71 Pcnt
1790627165	27 C	14.33 Volt	290 Pkt	920 Pkt	70 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)