This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274459 | 39 Count | 190 Count | 14 Count | 4.17 VDC | 0 VDC |
| 1836274309 | 44 Count | 207 Count | 17 Count | 4.17 VDC | 0 VDC |
| 1836274159 | 38 Count | 185 Count | 14 Count | 4.17 VDC | 0 VDC |
| 1765984906 | 200 Count | 606 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765984606 | 199 Count | 602 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765984306 | 198 Count | 601 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765984007 | 197 Count | 600 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765983708 | 196 Count | 592 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765983406 | 195 Count | 589 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765983106 | 194 Count | 587 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765982807 | 193 Count | 584 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765982507 | 192 Count | 583 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765982207 | 191 Count | 580 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765981907 | 190 Count | 572 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765981607 | 189 Count | 571 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765981306 | 188 Count | 571 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765981007 | 187 Count | 568 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765980707 | 186 Count | 565 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765980406 | 185 Count | 556 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765980107 | 184 Count | 552 Count | 0 Count | 3.38 VDC | 0.46 VDC |
| 1765979807 | 183 Count | 551 Count | 0 Count | 3.38 VDC | 0.2 VDC |
| 1765979507 | 182 Count | 551 Count | 0 Count | 3.38 VDC | 0.7 VDC |
| 1765979207 | 181 Count | 547 Count | 0 Count | 3.38 VDC | 0 VDC |
| 1765978907 | 180 Count | 542 Count | 0 Count | 3.39 VDC | 0.88 VDC |
| 1765978607 | 179 Count | 537 Count | 0 Count | 3.38 VDC | 1.6 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)