This is the latest recevied telemetry packets stored in our database for station/object ON3FV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778002258 | 12 Nr | 12.73 Vdc | 0 | 0 | 0 |
| 1778001964 | 7 Nr | 12.59 Vdc | 0 | 0 | 0 |
| 1778000522 | 12 Nr | 12.73 Vdc | 0 | 0 | 0 |
| 1778000228 | 9 Nr | 12.66 Vdc | 0 | 0 | 0 |
| 1777997262 | 10 Nr | 12.77 Vdc | 0 | 0 | 0 |
| 1777996968 | 7 Nr | 12.57 Vdc | 0 | 0 | 0 |
| 1777992884 | 14 Nr | 12.86 Vdc | 0 | 0 | 0 |
| 1777992579 | 13 Nr | 12.8 Vdc | 0 | 0 | 0 |
| 1777992279 | 13 Nr | 13.96 Vdc | 0 | 0 | 0 |
| 1777992138 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1777992128 | 11 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777992113 | 11 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777992098 | 14 Nr | 13.95 Vdc | 0 | 0 | 0 |
| 1777992083 | 12 Nr | 13.95 Vdc | 0 | 0 | 0 |
| 1777992068 | 10 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1777992053 | 5 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777992043 | 9 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1777992033 | 5 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1777992023 | 11 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1777992012 | 10 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1777991997 | 9 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777991987 | 10 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777991977 | 10 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777991967 | 11 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1777991957 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)