This is the latest recevied telemetry packets stored in our database for station/object W2JKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Current* | SOC* | Energy* | Value5* |
|---|---|---|---|---|---|
| 1774149886 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774149286 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774148686 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774148085 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774147485 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774146885 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774146117 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774145518 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774144884 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774144284 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774143684 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774143084 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774142485 | 13.2 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774141885 | 13.3 V | 0 A | 99.2 % | 16499 Wh | 0 |
| 1774141285 | 13.3 V | -2 A | 99.2 % | 16499 Wh | 0 |
| 1774137154 | 13.2 V | 0 A | 99.2 % | 16493 Wh | 0 |
| 1774136554 | 13.2 V | 0 A | 99.2 % | 16493 Wh | 0 |
| 1774128949 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774128349 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774127749 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774127149 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774126549 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774125949 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774125350 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
| 1774124750 | 13.2 V | 0 A | 99.2 % | 16494 Wh | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.1, 0
Current: 0, 0.1, -300
SOC: 0, 0.1, 0
Energy: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)