This is the latest recevied telemetry packets stored in our database for station/object K1RAX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | QSOs* | Spots* | Spotters* | Heard* | WSPRs* |
|---|---|---|---|---|---|
| 1790659882 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790659253 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790658622 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790657991 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790657362 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790656734 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790656105 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790655477 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790654856 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790654219 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790653590 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790652961 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790652332 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790651701 | 0 /h | 0 /h | 0 /h | 0 /h | 0 /h |
| 1790651072 | 1 /h | 8 /h | 8 /h | 12 /h | 0 /h |
| 1790650441 | 1 /h | 8 /h | 8 /h | 12 /h | 0 /h |
| 1790649809 | 1 /h | 88 /h | 88 /h | 24 /h | 0 /h |
| 1790649183 | 3 /h | 88 /h | 88 /h | 24 /h | 0 /h |
| 1790648564 | 5 /h | 284 /h | 244 /h | 80 /h | 0 /h |
| 1790647946 | 4 /h | 280 /h | 240 /h | 72 /h | 0 /h |
| 1790647318 | 5 /h | 408 /h | 316 /h | 88 /h | 0 /h |
| 1790646673 | 5 /h | 288 /h | 280 /h | 60 /h | 0 /h |
| 1790646042 | 5 /h | 256 /h | 256 /h | 48 /h | 0 /h |
| 1790645416 | 2 /h | 360 /h | 304 /h | 72 /h | 0 /h |
| 1790644791 | 3 /h | 204 /h | 188 /h | 56 /h | 0 /h |
*Used Equation Coefficients:
QSOs: 0, 1, 0
Spots: 0, 4, 0
Spotters: 0, 4, 0
Heard: 0, 4, 0
WSPRs: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)