APRS Track Direct

My position About ☰

reset

HS6PNA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6PNA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1774140440	6 Pkt	23 Pkt	-52 dBm	13.25 V
1774139514	17 Pkt	31 Pkt	-52 dBm	13.29 V
1774138586	6 Pkt	2 Pkt	-51 dBm	13.25 V
1774137660	0 Pkt	2 Pkt	-49 dBm	13.37 V
1774136736	2 Pkt	1 Pkt	-51 dBm	13.33 V
1774135812	2 Pkt	2 Pkt	-51 dBm	13.25 V
1774134887	3 Pkt	2 Pkt	-50 dBm	13.31 V
1774133962	8 Pkt	1 Pkt	-51 dBm	13.37 V
1774133036	6 Pkt	3 Pkt	-50 dBm	13.39 V
1774132111	12 Pkt	2 Pkt	-55 dBm	13.37 V
1774131186	10 Pkt	5 Pkt	-52 dBm	13.25 V
1774130261	5 Pkt	3 Pkt	-51 dBm	13.35 V
1774129336	7 Pkt	2 Pkt	-52 dBm	13.35 V
1774128411	3 Pkt	1 Pkt	-51 dBm	13.35 V
1774127487	1 Pkt	0 Pkt	-51 dBm	13.25 V
1774126562	0 Pkt	0 Pkt	-51 dBm	13.35 V
1774125638	0 Pkt	2 Pkt	-50 dBm	13.37 V
1774124677	0 Pkt	3 Pkt	-55 dBm	13.35 V
1774123753	0 Pkt	3 Pkt	-52 dBm	13.35 V
1774122828	1 Pkt	3 Pkt	-51 dBm	13.35 V
1774121904	0 Pkt	3 Pkt	-51 dBm	13.25 V
1774120979	0 Pkt	2 Pkt	-51 dBm	13.37 V
1774120055	2 Pkt	2 Pkt	-52 dBm	13.25 V
1774119131	0 Pkt	3 Pkt	-50 dBm	13.37 V
1774118207	1 Pkt	2 Pkt	-51 dBm	13.33 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)