APRS Track Direct

My position About ☰

reset

K1RAX-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1RAX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rand 1*	Rand 10*	Enter 255*	Wave*	Time*
1782511771	0.15 m	9.96 dB	163 Hz	231	18.07 h
1782511651	0.42 m	1.96 dB	106 Hz	213	18.07 h
1782511531	0.6 m	7.45 dB	74 Hz	191	18.07 h
1782511411	0.37 m	6.47 dB	136 Hz	167	17.98 h
1782511291	0.49 m	3.65 dB	233 Hz	141	17.98 h
1782511171	0.28 m	8.39 dB	77 Hz	114	17.98 h
1782511051	0.45 m	6.82 dB	255 Hz	88	17.88 h
1782510931	0.85 m	9.8 dB	221 Hz	64	17.88 h
1782510811	0.02 m	6.08 dB	90 Hz	42	17.88 h
1782510691	0.98 m	4.67 dB	186 Hz	24	17.79 h
1782510571	0.31 m	9.84 dB	167 Hz	11	17.79 h
1782510451	0.76 m	5.18 dB	170 Hz	3	17.69 h
1782510331	0.77 m	5.57 dB	46 Hz	0	17.69 h
1782510211	0.89 m	9.8 dB	213 Hz	3	17.69 h
1782510091	0.57 m	2.51 dB	50 Hz	11	17.6 h
1782509971	0.74 m	4.86 dB	249 Hz	24	17.6 h
1782509851	0.75 m	2.55 dB	153 Hz	42	17.6 h
1782509731	0.73 m	9.14 dB	188 Hz	64	17.51 h
1782509611	0.49 m	8.27 dB	54 Hz	88	17.51 h
1782509491	0.04 m	2.31 dB	162 Hz	114	17.51 h
1782509371	0.09 m	5.96 dB	176 Hz	141	17.41 h
1782509251	0.34 m	3.1 dB	242 Hz	167	17.41 h
1782509131	0.3 m	1.14 dB	220 Hz	191	17.41 h
1782509011	0.36 m	0 dB	1 Hz	213	17.32 h
1782508891	0.01 m	2.27 dB	206 Hz	231	17.32 h

*Used Equation Coefficients:

Rand 1: 0, 0.003922, 0

Rand 10: 0, 0.039216, 0

Enter 255: 0, 1, 0

Wave: 0, 1, 0

Time: 0, 0.094118, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)