APRS Track Direct

My position About ☰

reset

N7UV-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vbat*	Tbat*	Tcab*	RX1h*
1758183168	13.25 Volt	42.27 C	33.71 C	240 Pkt
1758182568	13.25 Volt	42.77 C	33.71 C	230 Pkt
1758181969	13.25 Volt	42.77 C	34.22 C	210 Pkt
1758181369	13.25 Volt	43.28 C	34.22 C	230 Pkt
1758180769	13.25 Volt	43.28 C	34.22 C	240 Pkt
1758180169	13.25 Volt	43.78 C	34.22 C	250 Pkt
1758179569	13.25 Volt	44.28 C	34.22 C	250 Pkt
1758178969	13.25 Volt	44.28 C	34.22 C	260 Pkt
1758178369	13.25 Volt	44.79 C	34.72 C	260 Pkt
1758177769	13.25 Volt	45.29 C	34.72 C	260 Pkt
1758177169	13.25 Volt	45.29 C	34.72 C	240 Pkt
1758176570	13.25 Volt	45.79 C	35.22 C	220 Pkt
1758175969	13.25 Volt	46.3 C	35.22 C	200 Pkt
1758175369	13.25 Volt	46.8 C	35.22 C	160 Pkt
1758174769	13.25 Volt	46.8 C	35.73 C	120 Pkt
1758174169	13.25 Volt	47.3 C	35.73 C	80 Pkt
1758173569	13.25 Volt	47.81 C	35.73 C	70 Pkt
1758172969	13.25 Volt	48.31 C	36.23 C	60 Pkt
1758172369	13.25 Volt	49.32 C	36.23 C	60 Pkt
1758171769	13.25 Volt	49.82 C	36.23 C	70 Pkt
1758171169	13.25 Volt	49.82 C	36.23 C	70 Pkt
1758170569	13.25 Volt	50.32 C	36.73 C	60 Pkt
1758169969	13.25 Volt	50.83 C	36.73 C	50 Pkt
1758169369	13.15 Volt	51.33 C	36.73 C	50 Pkt
1758168769	13.25 Volt	51.83 C	36.73 C	40 Pkt

*Used Equation Coefficients:

Vbat: 0, 0.10117, 0

Isolar: 0, 0.1953, -24.9984

Tbat: 0, 0.5033, -64.43

Tcab: 0, 0.5033, -64.43

RX1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)