APRS Track Direct

My position About ☰

reset

IZ5OQO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ5OQO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1744109101	13.95 Volt	290 Pkt	120 Pkt	66 Pcnt
1744108803	13.88 Volt	280 Pkt	120 Pkt	65 Pcnt
1744108801	13.88 Volt	280 Pkt	120 Pkt	65 Pcnt
1744108501	13.88 Volt	280 Pkt	120 Pkt	63 Pcnt
1744108204	13.95 Volt	270 Pkt	110 Pkt	62 Pcnt
1744108201	13.95 Volt	270 Pkt	110 Pkt	62 Pcnt
1744107903	13.95 Volt	280 Pkt	110 Pkt	61 Pcnt
1744107601	13.95 Volt	290 Pkt	120 Pkt	61 Pcnt
1744107301	13.88 Volt	290 Pkt	120 Pkt	62 Pcnt
1744107004	13.88 Volt	290 Pkt	130 Pkt	62 Pcnt
1744107001	13.88 Volt	290 Pkt	130 Pkt	62 Pcnt
1744106701	13.88 Volt	300 Pkt	130 Pkt	60 Pcnt
1744106405	13.88 Volt	300 Pkt	130 Pkt	61 Pcnt
1744106401	13.88 Volt	300 Pkt	130 Pkt	61 Pcnt
1744106101	13.88 Volt	300 Pkt	130 Pkt	61 Pcnt
1744105804	13.95 Volt	290 Pkt	130 Pkt	60 Pcnt
1744105801	13.95 Volt	290 Pkt	130 Pkt	60 Pcnt
1744105501	13.88 Volt	290 Pkt	120 Pkt	62 Pcnt
1744105204	13.95 Volt	290 Pkt	120 Pkt	62 Pcnt
1744105201	13.95 Volt	290 Pkt	120 Pkt	62 Pcnt
1744104901	13.95 Volt	290 Pkt	110 Pkt	62 Pcnt
1744104604	13.88 Volt	300 Pkt	120 Pkt	63 Pcnt
1744104601	13.88 Volt	300 Pkt	120 Pkt	63 Pcnt
1744104301	13.88 Volt	300 Pkt	120 Pkt	63 Pcnt
1744104001	13.95 Volt	300 Pkt	120 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)