This is the latest recevied telemetry packets stored in our database for station/object LZ1NAG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791861833 | 14.3 C | 62.8 % | 1026.13 hPa | 0 | 0 |
| 1791861556 | 13.4 C | 61.02 % | 1026 hPa | 0 | 0 |
| 1791861314 | 13 C | 53.41 % | 1022.5 hPa | 0 | 0 |
| 1791861162 | 11.5 C | 55.26 % | 1026.13 hPa | 0 | 0 |
| 1791814272 | 22.9 C | 48.27 % | 1023.25 hPa | 0 | 0 |
| 1791813235 | 26.2 C | 43.42 % | 1022.38 hPa | 0 | 0 |
| 1791812965 | 25.6 C | 44.14 % | 1022 hPa | 0 | 0 |
| 1791812528 | 21.3 C | 51.64 % | 1023 hPa | 0 | 0 |
| 1791808152 | 24.8 C | 46.75 % | 1021.75 hPa | 0 | 0 |
| 1791807978 | 23.8 C | 48.73 % | 1019.5 hPa | 0 | 0 |
| 1791806515 | 20 C | 53.7 % | 1021.5 hPa | 0 | 0 |
| 1791799060 | 27 C | 40.81 % | 1021.75 hPa | 0 | 0 |
| 1791798646 | 24.2 C | 45.02 % | 1021.5 hPa | 0 | 0 |
| 1791798495 | 22.8 C | 48.57 % | 1020 hPa | 0 | 0 |
| 1791798365 | 21.3 C | 53.42 % | 1023.5 hPa | 0 | 0 |
| 1791796908 | 20.5 C | 50.93 % | 1024.75 hPa | 0 | 0 |
| 1791796655 | 18.7 C | 55.05 % | 1022.5 hPa | 0 | 0 |
| 1791795735 | 19 C | 52.35 % | 1022.13 hPa | 0 | 0 |
| 1791795582 | 18.5 C | 53.1 % | 1021.13 hPa | 0 | 0 |
| 1791789324 | 17.5 C | 54.58 % | 1023.25 hPa | 0 | 0 |
| 1791788183 | 17.6 C | 55.72 % | 1022.63 hPa | 0 | 0 |
| 1791786983 | 18.3 C | 54.4 % | 1022.38 hPa | 0 | 0 |
| 1791784024 | 21.6 C | 49 % | 1019.63 hPa | 0 | 0 |
| 1791783687 | 20.4 C | 51.44 % | 1020.88 hPa | 0 | 0 |
| 1791783256 | 19.4 C | 52.78 % | 1023.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)