This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782505552 | 799 Count | 766 Count | 684 Count | 3.44 VDC | 0.14 VDC |
| 1782501946 | 798 Count | 766 Count | 684 Count | 3.48 VDC | 0.14 VDC |
| 1782498341 | 797 Count | 766 Count | 684 Count | 3.45 VDC | 0.14 VDC |
| 1782494735 | 796 Count | 766 Count | 684 Count | 3.49 VDC | 0.14 VDC |
| 1782491159 | 794 Count | 765 Count | 683 Count | 3.49 VDC | 0.14 VDC |
| 1782487554 | 792 Count | 764 Count | 682 Count | 3.49 VDC | 0.14 VDC |
| 1782483949 | 773 Count | 745 Count | 664 Count | 3.51 VDC | 0.14 VDC |
| 1782480343 | 760 Count | 732 Count | 652 Count | 3.52 VDC | 0.14 VDC |
| 1782476740 | 737 Count | 710 Count | 630 Count | 3.53 VDC | 0.14 VDC |
| 1782473133 | 724 Count | 691 Count | 618 Count | 3.53 VDC | 0.14 VDC |
| 1782469556 | 723 Count | 691 Count | 618 Count | 3.53 VDC | 0.14 VDC |
| 1782465951 | 722 Count | 687 Count | 618 Count | 3.48 VDC | 0.14 VDC |
| 1782462349 | 716 Count | 681 Count | 613 Count | 3.48 VDC | 0.14 VDC |
| 1782458740 | 713 Count | 679 Count | 611 Count | 3.45 VDC | 0.14 VDC |
| 1782455135 | 709 Count | 676 Count | 608 Count | 3.4 VDC | 0.14 VDC |
| 1782451530 | 701 Count | 669 Count | 601 Count | 3.35 VDC | 0.14 VDC |
| 1782429557 | 688 Count | 659 Count | 591 Count | 3.37 VDC | 0.14 VDC |
| 1782425952 | 687 Count | 659 Count | 591 Count | 3.39 VDC | 0.14 VDC |
| 1782422378 | 686 Count | 659 Count | 591 Count | 3.45 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)