This is the latest recevied telemetry packets stored in our database for station/object ON3RIP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790654144 | 379 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790653241 | 359 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790652426 | 344 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790651523 | 329 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790650620 | 310 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790649716 | 290 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790648813 | 267 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790647910 | 252 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790647003 | 231 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790646100 | 215 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790645197 | 196 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790644293 | 179 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790643390 | 160 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790642487 | 143 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790641584 | 123 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790640680 | 108 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790639777 | 90 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790638874 | 74 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790637967 | 55 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790637063 | 39 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790636157 | 1000 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790635254 | 974 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790634350 | 959 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790633446 | 943 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790632543 | 925 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)