This is the latest recevied telemetry packets stored in our database for station/object IT9CYW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770134929 | 24.9 C | 33.31 % | 1017.75 hPa | 0 | 0 |
| 1770134292 | 25.2 C | 32.73 % | 1011.75 hPa | 0 | 0 |
| 1770134214 | 25.3 C | 33.53 % | 1012.25 hPa | 0 | 0 |
| 1770134165 | 25.4 C | 33.58 % | 1013.75 hPa | 0 | 0 |
| 1770134138 | 25.4 C | 33.58 % | 1010.88 hPa | 0 | 0 |
| 1770134107 | 25.4 C | 33.9 % | 1012.5 hPa | 0 | 0 |
| 1770134085 | 25.4 C | 33.9 % | 1011.38 hPa | 0 | 0 |
| 1770134069 | 25.4 C | 34.6 % | 1013.5 hPa | 0 | 0 |
| 1770134034 | 25.4 C | 34.6 % | 1011.75 hPa | 0 | 0 |
| 1770133976 | 25.4 C | 34.38 % | 1010.63 hPa | 0 | 0 |
| 1770133960 | 25.4 C | 34.38 % | 1010 hPa | 0 | 0 |
| 1770133936 | 25.4 C | 35.24 % | 1011 hPa | 0 | 0 |
| 1770133920 | 25.4 C | 35.24 % | 1010.63 hPa | 0 | 0 |
| 1770133885 | 25.4 C | 35.24 % | 993.25 hPa | 0 | 0 |
| 1770133854 | 25.4 C | 35.79 % | 1009.75 hPa | 0 | 0 |
| 1770133829 | 25.2 C | 35.83 % | 1010.75 hPa | 0 | 0 |
| 1770133813 | 25.2 C | 35.83 % | 1010.63 hPa | 0 | 0 |
| 1770133797 | 25.2 C | 35.83 % | 1010.25 hPa | 0 | 0 |
| 1770133765 | 25.1 C | 36.39 % | 1009.5 hPa | 0 | 0 |
| 1770133738 | 25.1 C | 36.39 % | 1009.25 hPa | 0 | 0 |
| 1770133723 | 25.1 C | 36.39 % | 1009.5 hPa | 0 | 0 |
| 1770133707 | 25 C | 36.99 % | 1011.5 hPa | 0 | 0 |
| 1770133691 | 25 C | 36.99 % | 1010.63 hPa | 0 | 0 |
| 1770133675 | 25 C | 36.99 % | 1009.88 hPa | 0 | 0 |
| 1770133659 | 25 C | 36.99 % | 1009.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)