This is the latest recevied telemetry packets stored in our database for station/object VA7MWZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | OTemp* | OHumd* | BTemp* | X* |
|---|---|---|---|---|---|
| 1779760991 | 93 % | 13.9 C | 71.4 % | 16 C | 0.1 Unit |
| 1779759191 | 89.6 % | 14 C | 71.3 % | 16 C | 0.1 Unit |
| 1779757390 | 89.9 % | 14 C | 72.3 % | 16 C | 0.1 Unit |
| 1779755591 | 90.2 % | 13.8 C | 69.4 % | 16 C | 0.1 Unit |
| 1779753790 | 90.5 % | 14.8 C | 65.2 % | 16 C | 0.1 Unit |
| 1779751990 | 90.8 % | 15.4 C | 63.4 % | 16 C | 0.1 Unit |
| 1779750191 | 91.1 % | 15.3 C | 61.2 % | 16 C | 0.1 Unit |
| 1779748390 | 91.4 % | 14.9 C | 60.7 % | 16 C | 0.1 Unit |
*Used Equation Coefficients:
Batt: 0, 0.1, 0
OTemp: 0, 0.1, 0
OHumd: 0, 0.1, 0
BTemp: 0, 0.1, 0
X: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)