APRS Track Direct

My position About ☰

reset

XE2MFT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2MFT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1778045641	1.34 Load	77.9 DegC	47 Mb	911 Pkt	636 Pkt
1778045342	1.25 Load	77.9 DegC	40 Mb	3 Pkt	3 Pkt
1778045041	1.3 Load	77.36 DegC	48 Mb	592 Pkt	160 Pkt
1778044739	1.23 Load	77.9 DegC	49 Mb	828 Pkt	638 Pkt
1778044442	1.27 Load	78.44 DegC	40 Mb	4 Pkt	4 Pkt
1778044141	1.25 Load	76.83 DegC	42 Mb	834 Pkt	154 Pkt
1778043842	1.29 Load	77.36 DegC	43 Mb	803 Pkt	738 Pkt
1778043551	1.4 Load	77.9 DegC	40 Mb	3 Pkt	3 Pkt
1778043241	1.24 Load	77.36 DegC	45 Mb	349 Pkt	53 Pkt
1778042942	1.27 Load	77.9 DegC	43 Mb	786 Pkt	639 Pkt
1778042642	1.2 Load	78.44 DegC	41 Mb	7 Pkt	4 Pkt
1778042341	1.3 Load	77.36 DegC	41 Mb	331 Pkt	55 Pkt
1778042042	1.27 Load	77.9 DegC	45 Mb	994 Pkt	658 Pkt
1778041742	1.35 Load	78.44 DegC	41 Mb	4 Pkt	4 Pkt
1778041440	1.36 Load	77.9 DegC	41 Mb	485 Pkt	162 Pkt
1778041139	1.28 Load	77.9 DegC	48 Mb	910 Pkt	751 Pkt
1778040842	1.27 Load	78.98 DegC	45 Mb	3 Pkt	3 Pkt
1778040540	1.28 Load	78.44 DegC	46 Mb	412 Pkt	164 Pkt
1778040242	1.33 Load	77.9 DegC	48 Mb	782 Pkt	651 Pkt
1778039942	1.25 Load	78.98 DegC	43 Mb	4 Pkt	5 Pkt
1778039640	1.29 Load	77.36 DegC	47 Mb	508 Pkt	57 Pkt
1778039342	1.28 Load	77.9 DegC	46 Mb	971 Pkt	739 Pkt
1778039042	1.28 Load	78.44 DegC	42 Mb	4 Pkt	4 Pkt
1778038740	1.31 Load	78.44 DegC	54 Mb	461 Pkt	63 Pkt
1778038442	1.29 Load	77.9 DegC	56 Mb	838 Pkt	646 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)