This is the latest recevied telemetry packets stored in our database for station/object DL6DBZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1753766100 | 1007.8 hPa | 28.7 C deg | 44.4 % | 451 - | 0 C deg |
| 1753760699 | 1007.9 hPa | 28.6 C deg | 44.5 % | 460 - | 0 C deg |
| 1753751699 | 1008.6 hPa | 28.8 C deg | 44.4 % | 454 - | 0 C deg |
| 1753748099 | 1008.8 hPa | 28.9 C deg | 44.3 % | 450 - | 0 C deg |
| 1753746299 | 1008.7 hPa | 28.9 C deg | 44.3 % | 444 - | 0 C deg |
| 1753740898 | 1008.5 hPa | 29 C deg | 44.2 % | 439 - | 0 C deg |
| 1753739098 | 1008.5 hPa | 29 C deg | 44.2 % | 439 - | 0 C deg |
| 1753731897 | 1007.9 hPa | 29.3 C deg | 44 % | 412 - | 0 C deg |
| 1753726497 | 1007.2 hPa | 29.3 C deg | 43.5 % | 441 - | 0 C deg |
| 1753724697 | 1007 hPa | 29.6 C deg | 43.5 % | 436 - | 0 C deg |
| 1753722897 | 1006.8 hPa | 29.5 C deg | 43.5 % | 442 - | 0 C deg |
| 1753717497 | 1006 hPa | 29.1 C deg | 43.6 % | 448 - | 0 C deg |
| 1753715696 | 1006 hPa | 29.2 C deg | 44.9 % | 433 - | 0 C deg |
| 1753712096 | 1006.2 hPa | 29.2 C deg | 44.6 % | 434 - | 0 C deg |
| 1753710296 | 1006.3 hPa | 29.1 C deg | 44.6 % | 449 - | 0 C deg |
| 1753704896 | 1006.5 hPa | 29 C deg | 44.7 % | 452 - | 0 C deg |
| 1753694095 | 1005.9 hPa | 28.5 C deg | 44.4 % | 472 - | 0 C deg |
| 1753692295 | 1005.8 hPa | 28.5 C deg | 44.4 % | 474 - | 0 C deg |
| 1753688695 | 1005.6 hPa | 28.4 C deg | 44.3 % | 472 - | 0 C deg |
| 1753686895 | 1005.5 hPa | 28.4 C deg | 44.2 % | 472 - | 0 C deg |
| 1753685094 | 1005.4 hPa | 28.4 C deg | 44 % | 469 - | 0 C deg |
| 1753683294 | 1005.4 hPa | 28.4 C deg | 43.8 % | 466 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)