This is the latest recevied telemetry packets stored in our database for station/object WA2WA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Charge* | Rtime* | Input* | Status* | Load* |
|---|---|---|---|---|---|
| 1744348502 | 97 % | 6254 s | 123 V | 0 | 4 % |
| 1744348202 | 97 % | 6302 s | 124 V | 0 | 4 % |
| 1744347902 | 97 % | 6161 s | 123 V | 0 | 5 % |
| 1744347603 | 97 % | 6880 s | 124 V | 0 | 4 % |
| 1744347002 | 97 % | 9712 s | 124 V | 0 | 3 % |
| 1744346702 | 97 % | 6880 s | 123 V | 0 | 4 % |
| 1744346103 | 97 % | 6880 s | 124 V | 0 | 4 % |
| 1744345802 | 97 % | 6880 s | 124 V | 0 | 4 % |
| 1744345502 | 97 % | 6880 s | 124 V | 0 | 4 % |
| 1744345202 | 97 % | 6880 s | 123 V | 0 | 4 % |
| 1744344602 | 97 % | 6880 s | 123 V | 0 | 4 % |
| 1744344302 | 97 % | 6880 s | 124 V | 0 | 4 % |
| 1744343402 | 97 % | 6880 s | 123 V | 0 | 4 % |
| 1744343104 | 97 % | 9712 s | 123 V | 0 | 3 % |
| 1744342803 | 97 % | 6400 s | 123 V | 0 | 4 % |
| 1744342503 | 97 % | 6400 s | 122 V | 0 | 4 % |
| 1744341902 | 97 % | 9712 s | 122 V | 0 | 3 % |
| 1744341602 | 96 % | 6880 s | 122 V | 0 | 4 % |
| 1744341303 | 97 % | 6880 s | 123 V | 0 | 4 % |
| 1744341003 | 97 % | 7862 s | 122 V | 0 | 3 % |
| 1744340708 | 97 % | 6880 s | 122 V | 0 | 4 % |
| 1744340102 | 97 % | 6880 s | 122 V | 0 | 4 % |
| 1744339803 | 97 % | 9712 s | 122 V | 0 | 3 % |
| 1744339503 | 97 % | 6880 s | 122 V | 0 | 4 % |
| 1744339202 | 97 % | 6880 s | 123 V | 0 | 4 % |
*Used Equation Coefficients:
Charge: 0, 1, 0
Rtime: 0, 1, 0
Input: 0, 1, 0
Status: 0, 1, 0
Load: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)