APRS Track Direct

My position About ☰

reset

HS3UAA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3UAA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1732547865	4 ug/m3	8 ug/m3	12 ug/m3	-45 dBm	13.97 V
1732547543	3 ug/m3	5 ug/m3	10 ug/m3	-53 dBm	13.88 V
1732547221	3 ug/m3	6 ug/m3	7 ug/m3	-45 dBm	13.9 V
1732546898	5 ug/m3	8 ug/m3	11 ug/m3	-45 dBm	13.97 V
1732546577	5 ug/m3	9 ug/m3	10 ug/m3	-41 dBm	13.97 V
1732546254	3 ug/m3	6 ug/m3	8 ug/m3	-46 dBm	13.97 V
1732545933	3 ug/m3	4 ug/m3	4 ug/m3	-46 dBm	13.99 V
1732545610	4 ug/m3	7 ug/m3	7 ug/m3	-44 dBm	13.97 V
1732545288	6 ug/m3	8 ug/m3	13 ug/m3	-48 dBm	13.88 V
1732544966	5 ug/m3	8 ug/m3	10 ug/m3	-50 dBm	13.97 V
1732544644	5 ug/m3	10 ug/m3	12 ug/m3	-46 dBm	13.9 V
1732544321	6 ug/m3	9 ug/m3	11 ug/m3	-51 dBm	13.97 V
1732543999	5 ug/m3	8 ug/m3	12 ug/m3	-51 dBm	13.88 V
1732543677	6 ug/m3	10 ug/m3	10 ug/m3	-47 dBm	13.97 V
1732543355	4 ug/m3	7 ug/m3	7 ug/m3	-47 dBm	13.97 V
1732543033	6 ug/m3	7 ug/m3	9 ug/m3	-47 dBm	13.99 V
1732542711	6 ug/m3	11 ug/m3	13 ug/m3	-48 dBm	13.97 V
1732542389	5 ug/m3	9 ug/m3	19 ug/m3	-49 dBm	13.88 V
1732542067	5 ug/m3	9 ug/m3	11 ug/m3	-47 dBm	13.97 V
1732541745	7 ug/m3	8 ug/m3	10 ug/m3	-50 dBm	13.97 V
1732541423	6 ug/m3	11 ug/m3	11 ug/m3	-45 dBm	13.97 V
1732541152	6 ug/m3	11 ug/m3	12 ug/m3	-46 dBm	13.97 V
1732540830	8 ug/m3	13 ug/m3	16 ug/m3	-48 dBm	13.97 V
1732540508	8 ug/m3	14 ug/m3	15 ug/m3	-56 dBm	13.97 V
1732540186	12 ug/m3	19 ug/m3	23 ug/m3	-47 dBm	13.97 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)