This is the latest recevied telemetry packets stored in our database for station/object LD9NK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770194564 | 4.01 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770193666 | 4 VDC | 12.32 VDC | 0 | 0 | 0 |
| 1770192768 | 4.04 VDC | 12.32 VDC | 0 | 0 | 0 |
| 1770191869 | 4.04 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770190971 | 4.01 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770190072 | 4 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770189171 | 4.03 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770188273 | 4.02 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770187373 | 4.02 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770186475 | 4.04 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770185581 | 4.03 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770184677 | 4 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770183779 | 3.98 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770182880 | 4.01 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770181982 | 4.01 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770181083 | 4.02 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770180185 | 4.01 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770179286 | 4.02 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770178388 | 4.06 VDC | 12.32 VDC | 0 | 0 | 0 |
| 1770177491 | 4 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770176590 | 4.06 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770175691 | 4.03 VDC | 12.32 VDC | 0 | 0 | 0 |
| 1770174792 | 4.01 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1770173894 | 4.04 VDC | 12.32 VDC | 0 | 0 | 0 |
| 1770172996 | 4.01 VDC | 12.32 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)