This is the latest recevied telemetry packets stored in our database for station/object OE1UHA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp_Out* | Temp_Schacht* | Feuchte* | Radio_nSv_h* | Batt_%* |
|---|---|---|---|---|---|
| 1770118212 | -0.51 C | 1.96 C | 55.27 % | 72 nS/h | 45.08 % |
| 1770117493 | -0.51 C | 1.96 C | 57.23 % | 80 nS/h | 45.08 % |
| 1770115693 | -0.51 C | 1.96 C | 58.02 % | 80 nS/h | 45.08 % |
| 1770113893 | -0.51 C | 1.96 C | 53.7 % | 84 nS/h | 45.08 % |
| 1770112805 | -0.51 C | 1.96 C | 53.31 % | 80 nS/h | 45.08 % |
| 1770111836 | -0.51 C | 1.96 C | 52.92 % | 84 nS/h | 45.08 % |
*Used Equation Coefficients:
Temp_Out: 0, 0.2745, -20
Temp_Schacht: 0, 0.2745, -20
Feuchte: 0, 0.392, 0
Radio_nSv_h: 0, 4, 0
Batt_%: 0, 0.392, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)