This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770101150 | 0 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1770100250 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1770099350 | 0 Count | 832 Count | 0 Count | 0 VDC | 0 VDC |
| 1770098450 | 0 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1770097550 | 0 Count | 713 Count | 0 Count | 0 VDC | 0 VDC |
| 1770096650 | 0 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1770095750 | 0 Count | 661 Count | 0 Count | 0 VDC | 0 VDC |
| 1770094850 | 0 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1770093950 | 0 Count | 608 Count | 0 Count | 0 VDC | 0 VDC |
| 1770093050 | 0 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1770092152 | 0 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1770091251 | 0 Count | 540 Count | 0 Count | 0 VDC | 0 VDC |
| 1770090351 | 0 Count | 518 Count | 0 Count | 0 VDC | 0 VDC |
| 1770089451 | 0 Count | 496 Count | 0 Count | 0 VDC | 0 VDC |
| 1770088551 | 0 Count | 474 Count | 0 Count | 0 VDC | 0 VDC |
| 1770085851 | 0 Count | 405 Count | 0 Count | 0 VDC | 0 VDC |
| 1770084951 | 0 Count | 381 Count | 0 Count | 0 VDC | 0 VDC |
| 1770084051 | 0 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
| 1770083151 | 0 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1770082250 | 0 Count | 316 Count | 0 Count | 0 VDC | 0 VDC |
| 1770081350 | 0 Count | 291 Count | 0 Count | 0 VDC | 0 VDC |
| 1770080450 | 0 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1770079550 | 0 Count | 254 Count | 0 Count | 0 VDC | 0 VDC |
| 1770078650 | 0 Count | 233 Count | 0 Count | 0 VDC | 0 VDC |
| 1770077750 | 0 Count | 211 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)