APRS Track Direct

My position About ☰

reset

HS6GVH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6GVH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732290331	2 Pkt	0 Pkt	-76 dBm	13.23 V
1732289706	2 Pkt	0 Pkt	-76 dBm	13.23 V
1732289082	2 Pkt	0 Pkt	-77 dBm	13.19 V
1732288458	1 Pkt	0 Pkt	-76 dBm	13.23 V
1732287833	10 Pkt	0 Pkt	-75 dBm	13.23 V
1732287207	1 Pkt	0 Pkt	-77 dBm	13.23 V
1732286583	2 Pkt	0 Pkt	-77 dBm	13.23 V
1732285959	1 Pkt	0 Pkt	-76 dBm	13.23 V
1732285335	0 Pkt	0 Pkt	-77 dBm	13.25 V
1732284711	1 Pkt	1 Pkt	-75 dBm	13.23 V
1732284086	2 Pkt	0 Pkt	-76 dBm	13.25 V
1732283462	1 Pkt	0 Pkt	-75 dBm	13.29 V
1732282838	1 Pkt	0 Pkt	-75 dBm	13.25 V
1732282214	0 Pkt	0 Pkt	-74 dBm	13.29 V
1732281589	1 Pkt	0 Pkt	-76 dBm	13.37 V
1732280965	11 Pkt	0 Pkt	-76 dBm	13.41 V
1732280341	12 Pkt	0 Pkt	-76 dBm	13.39 V
1732279715	20 Pkt	0 Pkt	-72 dBm	13.45 V
1732279090	2 Pkt	0 Pkt	-72 dBm	13.49 V
1732278465	1 Pkt	0 Pkt	-73 dBm	13.54 V
1732277841	1 Pkt	0 Pkt	-73 dBm	13.54 V
1732277217	1 Pkt	0 Pkt	-73 dBm	13.54 V
1732276593	0 Pkt	0 Pkt	-74 dBm	13.56 V
1732275969	0 Pkt	0 Pkt	-74 dBm	13.54 V
1732275345	0 Pkt	0 Pkt	-72 dBm	13.56 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)