This is the latest recevied telemetry packets stored in our database for station/object DL2YED-98. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1770077458 | 994.4 hPa | 9.3 C deg | 46.3 % | 1002.8 hPa | 0 C deg |
| 1770073827 | 994.5 hPa | 9.4 C deg | 46.4 % | 1003 hPa | 0 C deg |
| 1770070194 | 994.8 hPa | 9.6 C deg | 46.6 % | 1003.3 hPa | 0 C deg |
| 1770068379 | 994.9 hPa | 9.7 C deg | 46.6 % | 1003.4 hPa | 0 C deg |
| 1770068379 | 994.9 hPa | 9.7 C deg | 46.6 % | 1003.4 hPa | 0 C deg |
| 1770066563 | 994.8 hPa | 9.7 C deg | 46.9 % | 1003.2 hPa | 0 C deg |
| 1770062933 | 994.7 hPa | 9.9 C deg | 46.9 % | 1003.1 hPa | 0 C deg |
| 1770048408 | 994.4 hPa | 11.2 C deg | 48.9 % | 1002.8 hPa | 0 C deg |
| 1770044770 | 994.1 hPa | 11.7 C deg | 48.7 % | 1002.5 hPa | 0 C deg |
| 1770039322 | 994.6 hPa | 10.8 C deg | 50 % | 1003 hPa | 0 C deg |
| 1770030242 | 994.8 hPa | 10.1 C deg | 48.9 % | 1003.2 hPa | 0 C deg |
| 1770012075 | 994.9 hPa | 9.8 C deg | 49.4 % | 1003.3 hPa | 0 C deg |
| 1770010265 | 994.8 hPa | 9.8 C deg | 49.4 % | 1003.3 hPa | 0 C deg |
| 1770004818 | 995 hPa | 9.9 C deg | 49.6 % | 1003.4 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)