This is the latest recevied telemetry packets stored in our database for station/object 9W2MMT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778045953 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1778045902 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1778045859 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1778045804 | 4.84 VDC | 0 | 0 | 0 | 0 |
| 1778045543 | 4.39 VDC | 0 | 0 | 0 | 0 |
| 1778045496 | 4.77 VDC | 0 | 0 | 0 | 0 |
| 1778045429 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1778045384 | 4.36 VDC | 0 | 0 | 0 | 0 |
| 1778044522 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1778044423 | 4.79 VDC | 0 | 0 | 0 | 0 |
| 1778044346 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1778044274 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1778024417 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1778024372 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1778023916 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1778023872 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1778023823 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1778023730 | 5.06 VDC | 0 | 0 | 0 | 0 |
| 1778023683 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1778023644 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1778023597 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1778022748 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1778022698 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1778022628 | 4.89 VDC | 0 | 0 | 0 | 0 |
| 1778022582 | 4.53 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)