APRS Track Direct

My position About ☰

reset

9M2OCX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2OCX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774123365	80 Pkt	16 Pkt	14 Pkt	-53 dBm	0.06 V
1774121537	37 Pkt	17 Pkt	4 Pkt	-52 dBm	0.06 V
1774119711	86 Pkt	16 Pkt	15 Pkt	-49 dBm	0.06 V
1774117884	56 Pkt	11 Pkt	6 Pkt	-52 dBm	0.04 V
1774115387	4 Pkt	0 Pkt	0 Pkt	-51 dBm	0.06 V
1774114324	53 Pkt	25 Pkt	9 Pkt	-47 dBm	0.06 V
1774112497	84 Pkt	22 Pkt	21 Pkt	-51 dBm	0.06 V
1774110669	101 Pkt	18 Pkt	19 Pkt	-51 dBm	0.06 V
1774108841	92 Pkt	15 Pkt	5 Pkt	-50 dBm	0.06 V
1774107014	79 Pkt	8 Pkt	10 Pkt	-52 dBm	0.06 V
1774104830	2 Pkt	0 Pkt	0 Pkt	-49 dBm	0.06 V
1774103016	30 Pkt	19 Pkt	20 Pkt	-51 dBm	0.06 V
1774101191	66 Pkt	19 Pkt	17 Pkt	-49 dBm	0.06 V
1774099363	52 Pkt	18 Pkt	14 Pkt	-49 dBm	0.06 V
1774097536	32 Pkt	21 Pkt	20 Pkt	-48 dBm	0.04 V
1774095710	33 Pkt	18 Pkt	19 Pkt	-50 dBm	0.06 V
1774093883	31 Pkt	19 Pkt	16 Pkt	-51 dBm	0.06 V
1774092057	56 Pkt	8 Pkt	10 Pkt	-48 dBm	0.06 V
1774087469	1 Pkt	0 Pkt	0 Pkt	-50 dBm	0.06 V
1774085765	52 Pkt	8 Pkt	7 Pkt	-51 dBm	0.06 V
1774082717	4 Pkt	0 Pkt	0 Pkt	-51 dBm	0.06 V
1774080836	56 Pkt	16 Pkt	15 Pkt	-49 dBm	0.06 V
1774079009	46 Pkt	17 Pkt	13 Pkt	-49 dBm	0.06 V
1774077183	92 Pkt	18 Pkt	16 Pkt	-50 dBm	0.06 V
1774075354	57 Pkt	7 Pkt	5 Pkt	-50 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)