This is the latest recevied telemetry packets stored in our database for station/object BURNTM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vb* | Vsp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770146759 | 4.19 Volt | 21.08 Volt | 0 | 0 | 0 |
| 1770146159 | 4.19 Volt | 21.3 Volt | 0 | 0 | 0 |
| 1770145561 | 4.19 Volt | 21.68 Volt | 0 | 0 | 0 |
| 1770144958 | 4.2 Volt | 21.6 Volt | 0 | 0 | 0 |
| 1770144358 | 4.2 Volt | 21.3 Volt | 0 | 0 | 0 |
| 1770143758 | 4.2 Volt | 21.22 Volt | 0 | 0 | 0 |
| 1770143155 | 4.2 Volt | 21.14 Volt | 0 | 0 | 0 |
| 1770142556 | 4.2 Volt | 21.44 Volt | 0 | 0 | 0 |
| 1770141956 | 4.21 Volt | 21.34 Volt | 0 | 0 | 0 |
| 1770140755 | 4.21 Volt | 21.3 Volt | 0 | 0 | 0 |
| 1770140154 | 4.21 Volt | 21.18 Volt | 0 | 0 | 0 |
| 1770139554 | 4.21 Volt | 21.28 Volt | 0 | 0 | 0 |
| 1770138954 | 4.21 Volt | 21.52 Volt | 0 | 0 | 0 |
| 1770137755 | 4.22 Volt | 21.42 Volt | 0 | 0 | 0 |
| 1770137154 | 4.22 Volt | 5.5 Volt | 0 | 0 | 0 |
| 1770136553 | 4.2 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770135953 | 4.19 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770135353 | 4.17 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770134752 | 4.14 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770134152 | 4.13 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770133552 | 4.12 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770132952 | 4.12 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1770132352 | 4.11 Volt | 5.4 Volt | 0 | 0 | 0 |
| 1770131752 | 4.11 Volt | 5.4 Volt | 0 | 0 | 0 |
| 1770131151 | 4.1 Volt | 5.4 Volt | 0 | 0 | 0 |
*Used Equation Coefficients:
Vb: 0, 0.01, 0
Vsp: 0, 0.02, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)