APRS Track Direct

My position About ☰

reset

GB7PL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object GB7PL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX Avg 10m*	RX Count 10m*	TX Count 10m*
1770172751	0.31 erlang	0 receptions	32 transmissions
1770172151	0.51 erlang	0 receptions	27 transmissions
1770171552	0.68 erlang	0 receptions	31 transmissions
1770170951	0.37 erlang	0 receptions	28 transmissions
1770170351	0.52 erlang	0 receptions	31 transmissions
1770169752	0.73 erlang	0 receptions	30 transmissions
1770169151	0.79 erlang	0 receptions	25 transmissions
1770168552	0.31 erlang	0 receptions	27 transmissions
1770167951	0.93 erlang	0 receptions	23 transmissions
1770167352	0.34 erlang	0 receptions	28 transmissions
1770166751	0.73 erlang	0 receptions	35 transmissions
1770166151	0.7 erlang	0 receptions	30 transmissions
1770165561	0.87 erlang	0 receptions	21 transmissions
1770164951	0.95 erlang	0 receptions	11 transmissions
1770164352	0.92 erlang	0 receptions	13 transmissions
1770163751	0.87 erlang	0 receptions	19 transmissions
1770163151	0.8 erlang	0 receptions	29 transmissions
1770162551	0.63 erlang	0 receptions	26 transmissions
1770161951	0.93 erlang	0 receptions	23 transmissions
1770161351	0.87 erlang	0 receptions	25 transmissions
1770160751	0.7 erlang	0 receptions	37 transmissions
1770160151	0.69 erlang	0 receptions	33 transmissions
1770159551	0.85 erlang	0 receptions	14 transmissions
1770158951	0.85 erlang	0 receptions	22 transmissions
1770158351	0.83 erlang	0 receptions	23 transmissions

*Used Equation Coefficients:

RX Avg 10m: 0, 0.00392, 0

TX Avg 10m: 0, 0.00392, 0

RX Count 10m: 0, 1, 0

TX Count 10m: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)