APRS Track Direct

My position About ☰

reset

E25XKG-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25XKG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1*	PM2.5*	PM10*	AQI*	CPU-T*
1774139785	22 ug/m3	32 ug/m3	34 ug/m3	92 index	42 C
1774139484	21 ug/m3	31 ug/m3	33 ug/m3	90 index	42 C
1774139183	21 ug/m3	29 ug/m3	32 ug/m3	86 index	43 C
1774138881	21 ug/m3	30 ug/m3	33 ug/m3	88 index	42 C
1774138580	21 ug/m3	28 ug/m3	28 ug/m3	84 index	42 C
1774138279	21 ug/m3	28 ug/m3	29 ug/m3	84 index	41 C
1774137978	21 ug/m3	29 ug/m3	30 ug/m3	86 index	44 C
1774137677	22 ug/m3	30 ug/m3	32 ug/m3	88 index	42 C
1774137376	21 ug/m3	29 ug/m3	30 ug/m3	86 index	43 C
1774137075	21 ug/m3	29 ug/m3	30 ug/m3	86 index	43 C
1774136774	19 ug/m3	28 ug/m3	29 ug/m3	84 index	43 C
1774136473	20 ug/m3	28 ug/m3	30 ug/m3	84 index	43 C
1774136172	21 ug/m3	32 ug/m3	35 ug/m3	92 index	42 C
1774135871	21 ug/m3	31 ug/m3	33 ug/m3	90 index	42 C
1774135570	22 ug/m3	32 ug/m3	36 ug/m3	92 index	42 C
1774135269	22 ug/m3	31 ug/m3	32 ug/m3	90 index	42 C
1774134968	22 ug/m3	32 ug/m3	33 ug/m3	92 index	42 C
1774134667	22 ug/m3	32 ug/m3	34 ug/m3	92 index	42 C
1774134366	21 ug/m3	31 ug/m3	33 ug/m3	90 index	42 C
1774134065	0 ug/m3	0 ug/m3	0 ug/m3	0 index	42 C
1774133764	22 ug/m3	32 ug/m3	35 ug/m3	92 index	42 C
1774133463	22 ug/m3	32 ug/m3	34 ug/m3	92 index	43 C
1774133162	22 ug/m3	32 ug/m3	35 ug/m3	92 index	43 C
1774132861	22 ug/m3	32 ug/m3	35 ug/m3	92 index	43 C
1774132560	23 ug/m3	32 ug/m3	34 ug/m3	92 index	43 C

*Used Equation Coefficients:

PM1: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

AQI: 0, 1, 0

CPU-T: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)