APRS Track Direct

My position About ☰

reset

YM2KF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1750172212	39 Pkt	0 Pkt	4 Pkt	-72 dBm	14.56 V
1750171533	34 Pkt	0 Pkt	4 Pkt	-72 dBm	14.56 V
1750170827	36 Pkt	0 Pkt	5 Pkt	-69 dBm	14.54 V
1750170137	43 Pkt	0 Pkt	3 Pkt	-54 dBm	14.56 V
1750169442	50 Pkt	3 Pkt	6 Pkt	-68 dBm	14.56 V
1750168747	41 Pkt	0 Pkt	6 Pkt	-64 dBm	14.56 V
1750168054	51 Pkt	2 Pkt	8 Pkt	-55 dBm	14.56 V
1750167359	35 Pkt	5 Pkt	7 Pkt	-57 dBm	14.52 V
1750166667	51 Pkt	0 Pkt	4 Pkt	-56 dBm	14.58 V
1750165973	69 Pkt	2 Pkt	5 Pkt	-56 dBm	14.58 V
1750165278	64 Pkt	0 Pkt	3 Pkt	-53 dBm	14.54 V
1750164583	53 Pkt	0 Pkt	6 Pkt	-64 dBm	14.56 V
1750163888	64 Pkt	2 Pkt	2 Pkt	-59 dBm	14.56 V
1750163194	58 Pkt	0 Pkt	9 Pkt	-55 dBm	14.56 V
1750162500	62 Pkt	1 Pkt	9 Pkt	-55 dBm	14.58 V
1750161806	51 Pkt	3 Pkt	13 Pkt	-62 dBm	14.58 V
1750161112	64 Pkt	0 Pkt	5 Pkt	-59 dBm	14.56 V
1750160417	46 Pkt	2 Pkt	6 Pkt	-61 dBm	14.52 V
1750159724	42 Pkt	0 Pkt	15 Pkt	-60 dBm	14.56 V
1750159030	46 Pkt	0 Pkt	10 Pkt	-58 dBm	14.56 V
1750158336	51 Pkt	2 Pkt	4 Pkt	-56 dBm	14.58 V
1750157642	58 Pkt	1 Pkt	9 Pkt	-58 dBm	14.58 V
1750156948	56 Pkt	2 Pkt	8 Pkt	-69 dBm	14.58 V
1750156254	55 Pkt	1 Pkt	8 Pkt	-53 dBm	14.58 V
1750155562	53 Pkt	2 Pkt	16 Pkt	-57 dBm	14.6 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)