This is the latest recevied telemetry packets stored in our database for station/object IQ3VV-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718717334 | 114 | 3368 | 2643 | 38 | 3800 |
1718717132 | 114 | 3351 | 2642 | 38 | 3800 |
1718717072 | 114 | 3363 | 2642 | 39 | 3800 |
1718716949 | 114 | 3374 | 2641 | 38 | 3800 |
1718716910 | 114 | 3379 | 2641 | 37 | 3800 |
1718716782 | 114 | 3382 | 2644 | 42 | 3800 |
1718716742 | 114 | 3389 | 2641 | 40 | 3800 |
1718716597 | 114 | 3374 | 2644 | 50 | 3800 |
1718716515 | 114 | 3369 | 2646 | 47 | 3800 |
1718716433 | 114 | 3359 | 2643 | 44 | 3800 |
1718716326 | 114 | 3340 | 2646 | 46 | 3800 |
1718716287 | 114 | 3343 | 2642 | 42 | 3800 |
1718716247 | 114 | 3343 | 2642 | 42 | 3800 |
1718716077 | 114 | 3344 | 2642 | 43 | 3800 |
1718716037 | 114 | 3352 | 2642 | 43 | 3800 |
1718715997 | 114 | 3352 | 2642 | 43 | 3800 |
1718715834 | 114 | 3369 | 2643 | 45 | 3800 |
1718715768 | 114 | 3378 | 2643 | 44 | 3800 |
1718715666 | 114 | 3375 | 2642 | 45 | 3800 |
1718715585 | 114 | 3360 | 2641 | 45 | 3800 |
1718715457 | 114 | 3362 | 2644 | 48 | 3800 |
1718715397 | 114 | 3376 | 2643 | 52 | 3800 |
1718715358 | 114 | 3376 | 2643 | 52 | 3800 |
1718715297 | 114 | 3186 | 2639 | 41 | 3800 |
1718715174 | 114 | 3365 | 2642 | 50 | 3800 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)