APRS Track Direct

My position About ☰

reset

DL4ALA-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4ALA-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1774093500	1003.1 hPa	18.3 C deg	55.4 %	43 -	0 C deg
1774091685	1003.3 hPa	18.3 C deg	55.5 %	42 -	0 C deg
1774089870	1003.4 hPa	18.2 C deg	55.6 %	43 -	0 C deg
1774088055	1003.8 hPa	18.2 C deg	55.7 %	43 -	0 C deg
1774086239	1003.7 hPa	18.1 C deg	55.8 %	43 -	0 C deg
1774084424	1003.8 hPa	18.1 C deg	55.8 %	42 -	0 C deg
1774082609	1003.8 hPa	18.1 C deg	56 %	42 -	0 C deg
1774080798	1003.6 hPa	18 C deg	56.1 %	42 -	0 C deg
1774078983	1003.4 hPa	18 C deg	56.2 %	42 -	0 C deg
1774077165	1003.5 hPa	18 C deg	56.3 %	42 -	0 C deg
1774075350	1003.5 hPa	18.1 C deg	56.1 %	42 -	0 C deg
1774073535	1003.4 hPa	18.1 C deg	56.1 %	42 -	0 C deg
1774071720	1003.2 hPa	18.2 C deg	56.1 %	42 -	0 C deg
1774069902	1003.2 hPa	18.2 C deg	56.1 %	41 -	0 C deg
1774068087	1003.2 hPa	18.3 C deg	56.1 %	41 -	0 C deg
1774066272	1003 hPa	18.4 C deg	56.1 %	41 -	0 C deg
1774064457	1003.1 hPa	18.4 C deg	56.1 %	41 -	0 C deg
1774062638	1003.1 hPa	18.5 C deg	56.1 %	40 -	0 C deg
1774060823	1003 hPa	18.5 C deg	56 %	41 -	0 C deg
1774059008	1003 hPa	18.5 C deg	56 %	40 -	0 C deg
1774057193	1003.3 hPa	18.6 C deg	56 %	40 -	0 C deg
1774055375	1003.2 hPa	18.6 C deg	55.9 %	40 -	0 C deg
1774053560	1003.3 hPa	18.7 C deg	55.9 %	40 -	0 C deg
1774051745	1003.6 hPa	18.7 C deg	55.8 %	40 -	0 C deg
1774049930	1003.6 hPa	18.7 C deg	55.7 %	41 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)