This is the latest recevied telemetry packets stored in our database for station/object DH1NSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786715764 | 0 Count | 433 Count | 0 Count | 0 VDC | 0 VDC |
| 1786713964 | 0 Count | 431 Count | 0 Count | 0 VDC | 0 VDC |
| 1786712163 | 0 Count | 427 Count | 0 Count | 0 VDC | 0 VDC |
| 1786710363 | 0 Count | 425 Count | 0 Count | 0 VDC | 0 VDC |
| 1786708563 | 0 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1786706764 | 0 Count | 409 Count | 0 Count | 0 VDC | 0 VDC |
| 1786704963 | 0 Count | 408 Count | 0 Count | 0 VDC | 0 VDC |
| 1786703163 | 0 Count | 405 Count | 0 Count | 0 VDC | 0 VDC |
| 1786701363 | 0 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1786699563 | 0 Count | 400 Count | 0 Count | 0 VDC | 0 VDC |
| 1786697763 | 0 Count | 398 Count | 0 Count | 0 VDC | 0 VDC |
| 1786695963 | 0 Count | 397 Count | 0 Count | 0 VDC | 0 VDC |
| 1786694163 | 0 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1786692363 | 0 Count | 390 Count | 0 Count | 0 VDC | 0 VDC |
| 1786690563 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1786688762 | 0 Count | 382 Count | 0 Count | 0 VDC | 0 VDC |
| 1786686962 | 0 Count | 376 Count | 0 Count | 0 VDC | 0 VDC |
| 1786685166 | 0 Count | 374 Count | 0 Count | 0 VDC | 0 VDC |
| 1786683366 | 0 Count | 371 Count | 0 Count | 0 VDC | 0 VDC |
| 1786681566 | 0 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
| 1786679766 | 0 Count | 359 Count | 0 Count | 0 VDC | 0 VDC |
| 1786677966 | 0 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1786676165 | 0 Count | 356 Count | 0 Count | 0 VDC | 0 VDC |
| 1786674365 | 0 Count | 355 Count | 0 Count | 0 VDC | 0 VDC |
| 1786672565 | 0 Count | 353 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)