APRS Track Direct

My position About ☰

reset

LZ0BOT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0BOT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	EffTo*	Temp*
1732288681	12.75 Volt	130 Pkt	30 Pkt	61 Pcnt	18.82 C
1732288081	12.68 Volt	110 Pkt	30 Pkt	61 Pcnt	18.82 C
1732287481	12.68 Volt	100 Pkt	30 Pkt	61 Pcnt	18.82 C
1732287481	12.68 Volt	100 Pkt	30 Pkt	61 Pcnt	18.82 C
1732286881	12.75 Volt	100 Pkt	30 Pkt	61 Pcnt	18.82 C
1732286281	12.68 Volt	90 Pkt	30 Pkt	61 Pcnt	18.82 C
1732285681	12.68 Volt	80 Pkt	30 Pkt	61 Pcnt	18.82 C
1732285081	12.75 Volt	80 Pkt	30 Pkt	61 Pcnt	18.82 C
1732284481	12.75 Volt	90 Pkt	30 Pkt	61 Pcnt	18.96 C
1732283917	12.75 Volt	90 Pkt	30 Pkt	61 Pcnt	18.96 C
1732283881	12.75 Volt	90 Pkt	30 Pkt	61 Pcnt	18.96 C
1732283881	12.75 Volt	90 Pkt	30 Pkt	61 Pcnt	18.96 C
1732283281	12.68 Volt	100 Pkt	40 Pkt	61 Pcnt	18.96 C
1732282681	12.75 Volt	120 Pkt	40 Pkt	61 Pcnt	18.96 C
1732282081	12.75 Volt	140 Pkt	50 Pkt	61 Pcnt	18.96 C
1732281481	12.75 Volt	160 Pkt	50 Pkt	61 Pcnt	18.96 C
1732280881	12.75 Volt	180 Pkt	60 Pkt	61 Pcnt	19.11 C
1732280282	12.75 Volt	190 Pkt	70 Pkt	61 Pcnt	19.11 C
1732280281	12.75 Volt	190 Pkt	70 Pkt	61 Pcnt	19.11 C
1732279681	12.75 Volt	200 Pkt	70 Pkt	61 Pcnt	18.96 C
1732279081	12.75 Volt	200 Pkt	70 Pkt	61 Pcnt	18.96 C
1732278481	12.75 Volt	200 Pkt	60 Pkt	61 Pcnt	18.96 C
1732277881	12.68 Volt	210 Pkt	60 Pkt	61 Pcnt	18.96 C
1732277281	12.75 Volt	190 Pkt	50 Pkt	61 Pcnt	18.82 C
1732276682	12.75 Volt	190 Pkt	50 Pkt	61 Pcnt	18.82 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Temp: 0, 0.147, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)